B&G Stainless Steel 1 Gallon Pump Cylinder

(PO-762) Stainless Steel 1 Gallon Pump Cylinder is manufactured by B&G Equipment Company and is a replacement pump cylinder specifically used for maintaining the pump assembly on a B&G Professional Stainless Steel 1 gallon sprayer. When your B&G Sprayer has lost pressure, replacing the pump cylinder could help to restore the pressure.

Tools Needed

To use this part, you will need the appropriate B&G Sprayer to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Take the pump assembly out of the sprayer tank and take apart the cylinder. You will also have to remove the other gaskets and seals attached to the cylinder.
• Step 2: Observe the cylinder for blemishes, cracks or holes and then replace with the new cylinder.
• Step 3: Reassemble the pump assembly and put your B&G Sprayer back together and you are ready to start spraying again.

Where to Use

The Stainless Steel 1 Gallon Pump Cylinder is meant to be used only to replace the pump cyclinder on a 1 gallon B&G handpump sprayer that come in stainless steel. There are other models it can also fit.

When to Use

Replace the pump cylinder when it has been damaged or you are experiencing a dip in spraying pressure. How often this part is changed depends on how often you use the sprayer. You may need to just change it once a year or multiple times a year for heavy use sprayers.

Safety Information

Be sure to wear gloves when handling the B&G sprayer parts, as there may be residue from chemicals or buildup on the filter. Be sure to properly drain and clean the sprayer parts before performing maintenance.

Special Considerations

Along with the pump cylinder, it would be wise to replace all the other small parts on the B&G Sprayer rather than just the one (check valve, pump gasket etc). Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time so your B&G sprayer is back in working order.